Using the SK 9000
12 |
SK 9000
Activating/deactivating the automatic lock mode
(Autolock)
The bodypack transmitter has an automatic lock mode that can be
activated or deactivated via the “
LOCK
” menu item (see page 16).
To
permanently
activate the automatic lock mode:
왘
Call up the “
LOCK
” menu item and select “
On
”.
왘
Store your setting by pressing the
SET
button
7
.
The automatic lock mode is permanently activated and the lock
mode icon
When the automatic lock mode is activated, you can still call up the
operating menu and use the
UP
button
8
/
DOWN
button
6
to select menu items (read-only function). You can also call up
the “
LOCK
” menu item in order to deactivate the automatic lock
mode. If, however, you try to call up any other menu item, the fol-
lowing display appears on the display panel:
While this display is shown (about 2 seconds), you can
temporarily
deactivate the lock mode:
왘
Press the
UP
button
8
or the
DOWN
button
6
.
The following display appears on the display panel:
왘
Press the
SET
button
7
.
The lock mode is temporarily deactivated. The lock mode icon
flashes.
- If you do not press a button, the lock mode is activated again
after 2 seconds. The lock mode icon
lights up constantly
again.
- If you continue navigating the operating menu or if you call
up a menu item, the lock mode is activated 2 seconds after the
last button press.
- If you exit a called up menu item, the lock mode is activated
immediately after exiting the menu item.
To
permanently
deactivate the automatic lock mode:
왘
Call up the “
LOCK
” menu item and select “
Off
”.