Sennheiser SET 900, Инструкция по эксплуатации

Страница: 10 / 40

6
Putting the Set 900 into operation
Putting the Set 900 into operation
Setting up the transmitter
왘
Place the transmitter so that:
– there are no obstacles in the light path between trans-
mitter and receiver and
– transmitter and receiver are not exposed to direct
sunlight. Direct sunlight may interfere with the
reception and may damage the transmitter.
If you are using a plasma TV screen :
Plasma TV screens radiate an infra-red signal that can
adversely affect the transmission quality.
왘
Make sure that the transmitter is placed as far as
possible from your plasma TV screen.
왘
If necessary, use a standard extension cable (3.5 mm
stereo jack plug) to reduce the distance between trans-
mitter and receiver. This extension cable is available from
your Sennheiser dealer.
Note:
One transmitter can be used to transmit to several
receivers on the same frequency.