Sennheiser RC Sheriff Trust, Руководство пользователя

Страница: 5 / 8

April 09 V8 5
Step 2: Set up the transmitters
The transmitters are preset, ready for use in most normal situations. Only one transmitter
can be used on each frequency channel at the same time.
Install 2 AA alkaline cells into the battery compartment. Do not use any other type of
battery.
Handheld
- unscrew the display section
- slide back the display section as far as it will go
- open the battery compartment cover
- insert the two batteries, being careful to observe the
correct polarity (shown in the compartment)
- close the battery compartment cover
- push the battery compartment back into the body of the
radio microphone
- screw the display section finger tight
Bodypack
- press the two unlocking buttons on the sides of the
transmitter
- open the battery compartment
- insert the two batteries, being careful to observe the
correct polarity (shown in the compartment)
- close the battery compartment.
- the battery compartment closes with an audible click
- when the battery compartment is open be careful not to
touch any of the buttons