Using the Set 860
Set 860 | 25
Selecting a hearing profile
To select the hearing profile that best suits you, proceed as follows:
1
Switch your audio source on
and select a program where
speech is foregrounded.
2
Put the stethoset receiver on
and make sure that only this
receiver is connected to the
transmitter. Otherwise, a hear-
ing profile cannot be adjusted.
3
Use the
L
and
R
buttons on the
transmitter to adjust the bal-
ance (see page 23). This
ensures that each subsequently
selected hearing profile is per-
fectly matched to your left/
right balance setting.
4
Press the
Hearing profile
button
on the transmitter
for 2 seconds to select the next
hearing profile.
Press the button again for
2 seconds to switch to the next
hearing profile.
5
Test which of the hearing pro-
files (1, 2 or 3) gives you the
best sound quality and helps
you to hear best.
Your individual hearing profile
is adjusted and saved on the
stethoset receiver.
Since your level of hearing impairment may change over time,
we recommend that you repeat the selection of the hearing
profile from time to time.
If you switch to the next hearing profile, the speech intelligi-
bility function is automatically deactivated so that you can
hear the hearing profile unchanged (see page 26).
To prevent accidental adjustment of the hearing profile set-
tings, you can activate the settings protection function (see
page 33).
ON
2...4
2s