Using the Set 860
Set 860 | 19
Using the Set 860
Switching the wireless headphone system on
1
Switch your audio source on.
If the transmitter is connected to the headphone socket (see
page 13) of your TV/audio source, adjust the volume of the
headphone socket on your TV/audio source to at least a medium
level.
2
Take the stethoset receiver out of the transmitter’s charging
compartment and pull the ear bows apart so that you can put the
receiver on.
The stethoset receiver automatically switches on when you pull
the ear bows apart. The transmitter automatically switches on
and the
Transmitter status
LED lights up white or blue. The audio
transmission starts.
The remaining operating time of the stethoset receiver is dis-
played on the transmitter (see page 17).
WARNING
Danger of hearing damage due to high volumes!
This receiver allows you to set higher volumes than conventional
devices. Constant high-volume use can cause hearing damage.
왘
Before putting the stethoset receiver on, set the volume on the
receiver to a low level.
왘
Do not expose yourself to high volume levels for extended peri-
ods of time.
왘
Use a hearing profile (see page 24) that improves especially
speech intelligibility without the need for a high volume.
Vol +
Vol -
VOLUME
ON
ON
2
1