13
Temporarily
interrupting a
tour,
manual-
ly
triggering
an Event
Briefly press the FUNC-
TION key
, then enter
the three-figure Event
number via the numeric
keys
.
flashes green. The re-
ceivers start reproduc-
ing the corresponding
Event.
Deactivating
the tour inter-
ruption
Before starting the tour,
use the “Visitor Profiler”
software module to set a
max. interruption time.
If the maximum inter-
ruption time has ex-
pired, Event
reproduction is auto-
matically stopped.
Set up a System Event
with the ID number 97
and position the identifi-
er(s).
Event reproduction is
automatically stopped
by an identifier.
Press the MIC key
(only works if no Live
Event is transmitted and
if the receivers do not
perform a download).
flashes green. All re-
ceivers stop reproduc-
ing the Event and
receive the portable
transmitter’s signal
again.
Finishing the
guided tour
Simultaneously press
the FUNCTION key
for
3 seconds.
, the
and the
go off.
Intended
operation
What to do
LED indications/Result
