background image

Using the transmitter

17

Sync function (SR 300 IEM G3 -> EK 300 IEM G3)

On the other hand, you can use the 

Sync 

function to adjust settings for your EK 300 IEM G3

portable receiver directly on your SR 300 IEM G3 rack-mount transmitter and transfer these
settings to the receiver via the infra-red interface (see page 30).

Carrying out an Easy Setup Sync or a Sync function

The following assumes that you are using the 

Easy Setup Sync

 function for setting up a multi-

channel system. You can also you the 

Easy Setup Sync 

function for establishing a

transmission link between one transmitter and one EK 300 IEM G3 receiver. 

When carrying out the 

Sync

 function, the transmitter’s current frequency bank and

channel setting is automatically transferred to the receiver via the infra-red
interface.

Easy Setup Sync

Sync

Switch all rack-mount transmitters and
one portable receiver on.

Switch your rack-mount transmitter and
your portable receiver on.

On all transmitters, call up the “

Easy

Setup

” menu item.

The text “

Easy Setup Sync

” and the 

icon appear on the display panels of the
transmitters.
The RF signal of the transmitters is
automatically deactivated.

Press the 

button

 on the

transmitter.
The 

 icon appears on the display

panels of the transmitter.

Use your EK 300 IEM G3 portable receiver
to perform a frequency preset scan.

Select a frequency bank with a sufficient
number of unused channels (see the
instruction manual of the receiver).

Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface

 of the first transmitter.

The first unused frequency preset is
transferred 

from the receiver to the

transmitter

.

Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface

 of your transmitter.

The parameters adjusted via the “

Sync

Settings

” menu item are transferred

from the transmitter to the receiver

In addition, the current frequency bank
and channel setting is transferred.

OFF

2

4

6

PHONES

OFF

2

4

6

PHONES

Содержание Evolution Wireles G3 SR 300 IEM















































Отзывы: