Sennheiser Evolution Wireles G3 SR 300 IEM, Инструкция по эксплуатации

Страница: 13 / 46

Putting the transmitter into operation
11
Connecting an audio source to the input sockets
왘
Use a suitable cable to connect the output of an audio source (e.g. a mixing console or an
additional SR 300 IEM G3) to the input socket
BAL AF IN L(I) and/or BAL AF IN R(II)
(see also page 11).
왘
Adjust the output level of your external device.
왘
Via the operating menu, adjust the transmitter’s input sensitivity.
The input sensitivity is adjusted via the “
Sensitivity ” menu item and is common for both
inputs (see page 20).
Connecting an audio source to the output sockets
왘
Use a suitable cable to connect the audio input of an external device (e.g. a mixing console
or an additional SR 300 IEM G3) to the output socket
LOOP OUT BAL L(I) and/or LOOP
OUT BAL R(II) (see also page 11).
Daisy chaining audio signals
The output sockets LOOP OUT BAL L and/or LOOP OUT BAL R allow you to daisy chain a
signal that is to be transmitted to all receivers from an audio source (e.g. a mixing console)
to one transmitter and then to the other transmitters.
To daisy chain an audio signal from one transmitter to the next:
왘
Route a signal from the mixing console to the input socket (in this example: BAL AF IN R
) of transmitter A .
왘
Connect the output socket LOOP OUT BAL R of transmitter A to the input socket BAL AF
IN R of transmitter B .
왘
Connect the output socket LOOP OUT BAL R of transmitter B to the input socket BAL AF
IN R of transmitter C .
왘
Repeat for the other transmitters.
PUSH PUSH
L(I) R(II)
BAL
AF IN
+22dBu MAX
The input amplifier of the SR 300 IEM G3 is designed for line level input.
The signal received from the AF input sockets BAL AF IN L(I) and BAL AF IN R(II)
is actively buffered and then routed to the output sockets LOOP OUT BAL L(I)
and LOOP OUT BAL R(II) . The AF output sockets will therefore work only when the
transmitter is switched on and powered.
L(I) R(II)
+22dBu
MAX
Loop Out
BAL
L(I) R(II)
BAL
AF IN
+22dBu MAX RF OUT
L(I) R(II)
+22dBu
MAX
Loop Out
BAL
L(I) R(II)
BAL
AF IN
+22dBu MAX RF OUT
L(I) R(II)
+22dBu
MAX
Loop Out
BAL
L(I) R(II)
BAL
AF IN
+22dBu MAX RF OUT
A
B
C The AF output sockets LOOP OUT BAL L(I) and/or LOOP OUT BAL R(II) will work
only when the transmitter is switched on and powered (see page 11).