Sennheiser EM 500, Инструкция по эксплуатации

Страница: 29 / 64

Using the operating menu
28
“Easy Setup”
Reset List Releases all locked frequency presets
35
Current List Selects an unused frequency preset
Scan New List Scans for unused receiving frequencies (frequency preset scan)
Exit Exits “ Easy Setup ” and returns to the main menu
-
Extended menu “Advanced Menu”
Tune Sets the receiving frequencies for the frequency banks “ U1 ” to “ U6 ”
39
Sets the frequency bank, the channel and the transmission
frequency (frequency banks “
U1 ” to “ U6 ”)
40
Guitar Tuner Selects the mode of the guitar tuner function 40
Sync Settings Calls up the “ Sync Settings ” submenu:
Adjusts the parameters to be transferred to the transmitters and
activates/deactivates the transfer (see below) 41
Pilot Tone Activates/deactivates the pilot tone evaluation
42
Warnings Calls up “ Warnings ”: Activates/deactivates warnings
(color change and warning messages)
43
LCD Contrast Adjusts the contrast of the display panel 43
Reset Resets the settings made in the operating menu
44
IP-Address Adjusts the IP address of the receiver 44
Software Revision Displays the current software revision 44
Exit Exits the extended menu “ Advanced Menu ” and returns
to the main menu
-
“Sync Settings”
SK Settings Adjusts the parameters to be transferred to the SK transmitters
and activates/deactivates the transfer
41
SKM Settings Adjusts the parameters to be transferred to the SKM radio
microphone and activates/deactivates the transfer
Exit Exits the “ Sync Settings ” submenu and returns to the extended
menu “ Advanced Menu ”
-
Display Function of the menu item Page