Sennheiser EM 3731-II - 09-09, Инструкция по эксплуатации

Страница: 39 / 50

Adjustment tips for the operating menu
38
Multi-channel operation
Combined with Sennheiser 3000 and 5000 series transmitters, the
receivers can form transmission links that are suitable for multi-channel
operation.
Before putting the transmission links into operation, we recommend that
you perform a scan in order to find a frequency bank with a sufficient
number of free channels:
왘
Switch all transmitters off.
왘
Use a receiver to scan all frequency banks for free channels (see
“Scanning the frequency banks for interference-free channels” on
page 36).
왘
Select a frequency bank with a sufficient number of free channels (see
“Selecting a frequency bank and a channel” on page 30).
왘
Set each transmitter/receiver pair in your multi-channel system to a
different free channel within this frequency bank.
Selecting the status display
Via the “ Display ” menu, you can select the status display:
CAUTION! Risk of reception interference!
If – within the receiver’s frequency range – transmitters
transmit on channels from different frequency banks,
reception can be subject to interference and inter-
modulation. Only the factory-preset frequencies within the
frequency banks “
1 ” to “ 6 ” are interference and
intermodulation free.
왘
Set all transmitters of a multi-channel system to different
channels within the same frequency bank.
Display
4
can IP-Ad
192
168
0
0
Selectable status display Contents of the display
1. “ Name ”
displays the freely selectable name
2. “ Bank/Channel ”
displays the frequency bank and the
channel number
3. “ Name/Command ”
displays the freely selectable name
and the command display
(EM 3732-II COM receiver only)
4. “ Bank/Channel/Command ”
displays the frequency bank, the channel
number and the command display
(EM 3732-II COM receiver only)
M
H
z
776.000
NAME
M
H
z
776.000
BANK
CH 01.01
M
H
z
776.000
NAME
COM
AF
M
H
z
800.450
BANK
CH 03.03
COM
AF