Sennheiser EM 3731-II - 09-09, Инструкция по эксплуатации

Страница: 38 / 50

37
Adjustment tips for the operating menu
Starting the scan
Via the “ Scan new ” menu, you can scan all frequency banks for free
channels. The last scan result is overwritten.
왘
Before starting the scan, switch all transmitters of your system off ,
since channels used by switched-on transmitters will not be displayed
as “free channels”.
왘
Turn the jog dial
7
until the arrow points to “ Scan new ”.
왘
Press the jog dial
7
to start the scan.
The receiver scans the frequency banks one after the other for free
channels. This can take several minutes. After the scan, a table displays
the number of free channels for each frequency bank and the green
backlighting of the
save button
8
flashes.
왘
Turn the jog dial
7
to select a frequency bank with a sufficient number
of free channels.
왘
Press the save button
8
.
The selected frequency bank is automatically called up in the “ Bank.Ch ”
menu.
왘
Select a channel from this frequency bank (see “Selecting a frequency
bank and a channel” on page 30).
Releasing channels that are used or subject to interference
After the scan, the channels that are occupied or subject to interference
are marked with a warning triangle and “
Freq. occupied ”. Via the
“ Scan reset ” menu, you can unmark these channels. The last scan result is
deleted.
왘
Turn the jog dial
7
until the arrow points to “ Scan reset ”.
왘
Press the jog dial
7
.
The number of free channels is reset to the maximum for all frequency
banks.
왘
Turn the jog dial
7
to select a frequency bank.
왘
Press the save button
8
.
The selected frequency bank is automatically called up in the “ Bank.Ch ”
menu.
Channel list
Scan new
Scan reset
You can cancel the scan at any time by pressing the esc button
6
.
The display changes to the setting mode of the “ Scan ” menu and
the last scan result is restored.
esc
s ave
syn c
digital audio
processing
syn c
DEV
M
H
z
777.005
U.01 BANK
CH
COM AF
8
7
B.Ch
1 .
776.000
MHz
Freq. occupied
After the scan, the channels that are occupied or subject to
interference are marked with a warning triangle and “
Freq.
occupied ”.
Channel list
Scan new
Scan reset
Bank 4 5 6 U
Free 32 31 33 60
Bank 1 2 3
Free 43 40 42
esc
s ave
syn c
digital audio
processing
syn c
DEV
M
H
z
777.005
U.01 BANK
CH COM AF
8 7