Installing the ASA 214
40
Connecting receivers to the ASA 214
You can connect and operate up to four stationary receivers to the
ASA 214.
Sennheiser receivers of the ew G4 and ew G3 series can also be supplied
with power from the ASA 214.
The following receivers are compatible:
evolution wireless G4:
•
EM 100 G4
•
EM 300-500 G4
evolution wireless G3:
•
EM 100 G3
•
EM 300 G3
•
EM 500 G3
2000 series:
•
EM 2000 (with its own power supply)
•
EM 2050 (with its own power supply)
To connect the receivers to the ASA 214 antenna splitter:
▷
Connect one of the receiver’s antenna inputs to one of the BNC sockets
A1
to
A4
using one of the supplied BNC cables.
The compatible receivers listed above do not require their own power
supply. They are powered via the BNC sockets
A1
to
A4
.
▷
Connect the receiver’s other antenna input to one of the BNC sockets
B1
to
B4
using one of the supplied BNC cables.
►
Содержание EM 100 G4
