Installing the ASA 214
38
Installing the ASA 214
These sections contain detailed information about installing and starting
up the ASA 214.
You can find information about operating the ASA 214 under “Using the
ASA 214”.
Connectors on the rear of the device
Product overview for the rear side of the ASA 214
►
1
ANT RF IN B
BNC socket
• Antenna input of diversity branch B
2
RF OUT A
BNC socket
• RF output only for connecting an additional ASA 214 to build an 8-
channel diversity system
• See “Configuring multi-channel systems”
3
DC IN
socket
• To connect the NT 1-1 power supply unit
• See “Connecting/disconnecting the ASA 214 to/from the power sup-
4
4 BNC sockets
B1
to
B4
• RF outputs of diversity branch B for connection to the receiver
• See “Connecting receivers to the ASA 214”
5
ANT RF IN A
BNC socket
• Antenna input of diversity branch A
Содержание EM 100 G4
