EM 100 G2, EM 300 G2, EM 500 G2
08/2004
5.4
Reading out/changing unit data via the “DATA“ service interface
5.4.1 Overview
You can read out and change unit data via the integrated “DATA“ service interface.
For example, Sennheiser's service software helps you with the following functions:
•
Reading out the current software version and, if necessary, initiating a software update.
•
Commissioning the receiver following replacement of hardware (e.g. when a board is changed).
•
Changing the current frequency table.
•
Changing/resetting the receiver factory settings.
5.4.2 Required hardware
You need the Sennheiser service set for unit data read-in and read-out.
The service set contains for portable ew G2 units
•
an infrared adapter for reading out/in data from portable units (e. g. SK 100),
for rack-mount ew G2 units
•
an RS232/RS485 converter,
•
an RS232 cable to connect the PC and the converter.
•
an RS485 cable to connect the receiver and the converter.
You can order the service set directly from Sennheiser:
service set for software ew G2, ID no. 094739, price group 161
5.4.3 Required software
The service software is available for download free of charge on our Internet homepage:
www.sennheise.com > Service & Distributors > Service Documentation > Download
The minimum operating system requirement to run the software is Microsoft
®
Windows 95
™
,
and a free COM port (RS232) is also required.
5.4.4 Information about the service software
A user guide for the service software is available in PDF format. It contains information about how to
commission the service set, how to install the service software and how to read in/out unit data.
Please find more informations in the instructions for use of the ew G2 service software. Once the installation of
the software is complete you can find this help file in the Windows menu [Start].
