AC 3
| 13
Cleaning the AC 3
Setting the AC 3 to standby mode
왘
Press the
STANDBY
button
for approx. 2 seconds.
The operation indicator
and the 4 status LEDs
go off.
The AC 3 switches to standby mode. Connected transmitters
are switched off, provided that they are powered via the BNC
sockets
RF IN 1
to
RF IN 4
.
Disconnecting the AC 3 from the mains
The
STANDBY
button
does
not
disconnect the AC 3 from the
mains. To disconnect the AC 3 from the mains:
왘
Unplug the NT 3-1 table top power supply from the wall
socket.
The AC 3 is switched off.
Cleaning the AC 3
왘
Before cleaning, disconnect the AC 3 from the mains
(see page 13).
왘
Only use a slightly damp cloth to clean the device.
CAUTION!
Liquids can damage the electronics of the device!
Liquids entering the housing of the device can cause a short-
circuit and damage the electronics.
왘
Keep all liquids away from the device.
왘
Do not use any solvents or cleansing agents.
