12 |
AC 3
Using the AC 3
Using the AC 3
Switching the AC 3 on
.
왘
Briefly press the
STANDBY
button
The operation indicator
lights up green. The LEDs 1 ... 4
behave as follows:
The RF signals of the correctly connected transmitters are
combined and transmitted via the connected transmitting
antenna.
CAUTION!
Risk of fire due to overheating of the AC 3!
The AC 3 equipped with a fan to assist dissipation of generated
heat.
왘
Make sure that the air vents
of the AC 3 are not covered
or blocked.
The fan of the AC 3 is temperature-controlled and
operates only when required.
LED 1 ... 4
Meaning
lights up
You have correctly connected an
SR 300 IEM G3 type transmitter;
the supply voltage for the trans-
mitter is available at BNC socket
RF IN 1
...
RF IN 4
.
does not light up
There is a short-circuit in the BNC
socket
RF IN 1
...
RF IN 4
:
왘
Read the chapter “If a problem
occurs ...” on page 14.
You have connected a transmitter
that is not of the ew G3 series:
왘
Make sure that this transmitter
has its own power supply.
