SenNet Pulse Counter Sigfox
www.satel-iberia.com
1
SenNet IoT Pulse Counter Sigfox
General description
SenNet IoT Pulse Counter Sigfox is a device that has 2 input standalone for impulse, type supported are reed or
transitorized output, specific from watermeter / electricity meter / heat meter etc..
Use sigfox network to connect with your cloud, you only need define interval to send.
These are the reference at depend of power supply type battery or AC power:
Wired & Setup
For transistorized output type is necessary take care polarity, and follow terminal
’
s polarity.
Reference
Power supply type
Pulse Counter Sigfox bat ++
Battery
3.6v@18000mAh (LS26500 x2)
Pulse Counter Sigfox AC
AC Power supply
100-265Vac
Basic steps to intall:
1.
Set interval to send
(by default 15 minutes)
.
2.
Set the type of uplink message ,
by default type 1
(counter 1 value)
,or type 2 (counter 1 value + counter 2 value).
3.
Take note ID / PAC to sign the device on Sigfox Cloud.
4.
Plug-in pack batteries to connector or AC power supply.
Setup parameters methods:
•
Throught donwlink message (see donwlink message seccion) ,
recommend method.
•
By cable micro-USB with PC console enter menu to set these
parameters.
