Senix HTPX2-M, Руководство оператора

Страница: 25 / 88

25 - EN WWW.SENIXTOOLS.COM
MAINTENANCE
WARNING:
Always remove the battery pack and let the
product completely cool down before performing
cleaning and maintenance work!
Always wear protective equipment to reduce the
risk of injury when operating this unit.
Only perform cleaning and maintenance work
according to these instructions! All further works
must be performed by a qualified specialist!
LUBRICATING THE BLADE
WARNING:
Always allow the blades of the pole hedge
trimmer to come to a complete stop and pull out
the battery pack before lubricating. Failure to
do so could result in accidental starting causing
possible serious personal injury.
For easier operation and longer blade life, lubricate the
trimmer blade before and after each use. If you will not be
using the pole hedge trimmer for an extended time, it is
advisable to oil the blade periodically.
Stop the pole hedge trimmer. Pull out the battery pack from
the product. Lay the pole hedge trimmer on a flat surface
and apply light weight machine oil along the edge of the top
blade (Fig. 18).
SHARPENING THE BLADE
WARNING:
During the maintenance, users should take
care of their safety. Always wear eye, hearing,
hand, foot and body protection to reduce the
risk of injury when operating this unit. And
check the unit that it can work normally after the
maintenance. If any deterioration occurs, follow
the maintenance according to this instruction!
Allow the blades of the pole hedge trimmer to come to
a complete stop in the position shown. This will allow
clearance for the file between the cutter teeth and the guard
teeth.
Remove and pulling out the battery pack from the product.
Clamp the blade assembly in a vise and file the exposed
cutting surface of each blade tooth with an 8 in. smooth
round file, 1/4 in. or 7/32 in. in diameter. Be sure to retain
the original angle of the tooth when filing.
In order to file both sides of each cutter tooth, you may
need to momentarily run the trimmer until the opposing
side of the cutter teeth are exposed. Do not run the trimmer
while it is locked into the vise. Make sure all tools for
sharpening have been removed before installing the battery.
Remove the battery pack and repeat the sharpening
process for the newly exposed teeth (Fig.19).
CLEANING
Switch the product off, pull out the battery pack from the
product.
Use a small brush to clean the outside of the unit. Do not
use strong detergents. Household cleaners that contain
aromatic oils such as pine and lemon, and solvents such as
kerosene, can damage plastic. Wipe off any moisture with
a soft cloth.
NOTE:
If the cutting blade is blocked by foreign objects during the
operating, stop the product, wait for the cutting blade stops
entirely, remove the foreign objects and clean the cutting
blade.
TRANSPORT
• Clean the product as described above.
• Install the blade cover during the transport.
• Always carry the product by its handle.
• Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
• Secure the product to prevent it from slipping or falling
over,damage or injury.
STORAGE
• Clean the product as described above.
• Store the product and its accessories in a dark, dry, frost-
free, well-ventilated place.
• Always store the product in a place that is inaccessible to
children. The ideal storage temperature is between
50°F(10°C) and 86°F(30°C).
• We recommend using the original package for storage or
covering the product with a suitable cloth or enclosure to
protect it against dust.
NOTE:
To prolong battery life, never store battery pack in a
completely discharged condition. Make sure the battery
pack is charged once per year or when the LED indicator
shows only one light.