Senix CSP4QL-L, Руководство оператора

Страница: 4 / 60

4 WWW.SENIXTOOLS.COM
RESIDUAL RISKS
• Damage to lungs if an effective dust mask is not
worn.
• Damage to hearing if effective hearing protection is
not worn.
• Health defects resulting from vibration emission if
the unit is being used over long periods of time or not
adequately managed and properly maintained.
Even when the unit is used as prescribed it is not
possible to eliminate all residual risk factors. The
following hazards may arise in connection with the unit’s
construction and design:
WARNING:
13. Never start or run the product inside a closed
room or building. Fumes from the exhaust contain
dangerous carbon monoxide.
14. Never attempt to make engine adjustments
while the unit is running. Always make engine
adjustments with the unit resting on a flat, clear
surface.
15. Do not use the unit if it is damaged or poorly
adjusted. Never remove the unit’s guard. Serious
injury to the operator or bystanders could result as
well as damage to the machine.
16. Inspect the area to be cut and remove all debris that
could become entangled in the nylon cutting head.
Also remove any objects that the unit may throw
during cutting.
17. Keep children away. Onlookers should be kept
at a safe distance from the work area, at least 15
METERS (50 FEET) away.
18. Never leave the unit unattended while the engine is
running.
19. Uses other than those intended by the manufacturer
can result in injury to the operator or damage to the
pole saw and other property.
20. Do not overreach. Keep proper footing and balance
at all times. Do not use the unit while standing on a
ladder or on any other unstable footing location.
21. FOLLOW INSTRUCTIONS for assembling and
operation.
22. Do not store the unit in a closed area where fuel
vapors can reach an open flame from hot water
heaters, furnaces, etc. Store in a locked, well
ventilated area only.
23. Ensure safe and proper performance of your unit.
Please only use original accessories. The use of
any other accessories or attachments may cause a
potential hazard or injury to the user, damage to the
unit, and void the warranty.
24. If the unit will not be used for a long time, clean
the unit completely, especially the fuel/oil tank, its
surroundings, and the air filter.
25. When refueling, stop the engine and confirm that
it is cooled down. Never refuel when the engine
is running or hot. When gasoline spills, be sure to
wipe it up completely and dispose of those materials
before starting the engine.
26. Stay clear of other workers or bystanders by at least
15 meters/50 feet.attention and confirm that the
operator stops the engine. Be careful not to startle
or distract the operator which can cause an unsafe
situation.
28. The engine should be turned off when the unit is
moved between work areas.
29. Pay attention to loosening and overheating
parts. If there is any abnormality of the unit, stop
operation immediately and check the unit carefully.
If necessary, have the unit serviced by customer
support. Never continue to operate a unit which
may be malfunctioning.
30. In start-up or during operation of the engine, never
touch hot parts such as the muffler, the high voltage
wire, or the spark plug.
31. After the engine has stopped, the muffler is still hot.
Never place the unit in any places where there are
flammable materials (dry grass, etc.), combustible
gasses, or combustible liquids.
32. Pay special attention to operation in the rain or just
after the rain as the ground may be slippery.
33. If you slip or fall to the ground, release the throttle
lever immediately.
34. Be careful not to drop the unit or hit it against
obstacles.
35. Before proceeding to adjust or repair the unit, be
sure to stop the engine and detach the spark plug.
36. When the machine is placed in storage for a
long time, drain fuel/oil from the fuel/oil tank and
carburetor, clean the parts, and move the machine
to a safe place.
37. Make periodic inspections to ensure safe and
efficient operation. For a thorough inspection of
your unit, contact customer support.
38. Keep the unit away from fire or sparks.
39. Keep your body warm, especially the head, neck,
feet, ankles, hands, and wrists.
40. Maintain good blood circulation by performing
vigorous arm exercises during frequent work breaks
and also by not smoking.
41. Limit the hours of operation.
42. If you experience discomfort, redness and swelling
of the fingers followed by whitening and loss of
feeling, consult your physician before further
exposing yourself to cold and vibration.
43. Always wear ear protection. Loud noises for long
periods can cause hearing loss, even permanent
deafness.
44. Wear no-slip heavy duty work gloves to improve
your grip on the handle. Gloves also reduce the
transmission of machine vibration to your hands.
45. Do not lay the machine on the side; otherwise the
fuel could spill out.
46. Fuel evaporation during refueling and exhaust
gases are harmful to the operator and people
around the unit.
47. Make sure that the fuel evaporation and exhaust
gases will not drift to the face of operator and keep
other people away from your working area.
48. Do not allow children or untrained individuals to use
this unit.