267 Lowell Rd, Hudson NH 03051, USA | Phone: 1.888.328.7661 | Fax: 1.888.329.8328 |
www.sengenuity.com
Helping Customers Innovate, Improve & Grow
Step 2:
continued...
As shown in Figure 5, connect the wireless interrogation unit to
RS232/RS485 cable. The Dipole Antenna should have already
be connected to the reader when it was delivered to you. If you
receive a reader with the antenna NOT connected please do not
use it if you are in the United States. You WILL be in violation
of FCC regulations. Please contact SenGenuity to arrange for a
replacement kit to be sent to you.
Step 2:
continued...
Connect the Wireless Interrogation Unit to a power supply
(5V±5% DC; 350mA) as shown in Figure 6. You can now connect
the RS232/ RS485 cable to your PC/laptop.
Step 2
Step 2: Setup and connect wireless interrogation
unit
Please select the communication interface (CAN or RS232/RS485)
to communicate with the wireless interrogation unit. If you
select the RS232/RS485 option, please select the appropriate
communication port on your PC/Laptop. Most kits will include an
RS232/RS485 cable and will not include a CAN adapter and cable.
Therefore please select the RS232/RS485 option when setting up
the kit.
Figure 4: Communication Interface
Figure 5: Wireless Interrogation unit connected to Antenna
and RS232/RS485 cable
Figure 6: Wireless Interrogation unit connected to Power
Supply
