ENGLISH 4/8
Bus connector for DIN rail
Z-PC-DINAL2-17,5 Accessory Use
MI002875-E
1
RS485 B
RS485 A
RS485 GND
Power supply
Power supply
IDC10
As it is illustrated in the next figure:
1) Insert the rear IDC10 connector
on a DIN rail free slot (the inserting
is univocal since the connectors
are polarized).
2) Tighten the locks placed at the
sides of the rear IDC10 connector
to fix the module.
In case of Z-PC-DINAL-2-17,5
accessory, the signals may be
provided by terminal blocks. The
figure shows the meaning of the
terminals and the position of the
DIP-switch (present on each DIN rail
supports listed on Accessories) for
network termination (not used in
case of Modbus network).
GNDSHLD: Shield to protect the
connection cables
( recommended).
In the figure the meaning of the
IDC10 connector pins is showed,
in the case the user decides to
provide the signals directly
through it.
