ENGLISH
- 2/8
t
Dimensions (L×H×W)
17,5 x 102,5 x 111 mm
Weight
140 g.
Case
Material PA6, Black color.
MODULE LAYOUT
l
Thermocouples measurement
: J, K, E, N, S, R, B, T.
type
l
μ
Measurement available in the following sizes: Voltage ( V) or Temperature (°C, °F, °K)
on Integer 16 bit and Floating-point 32 bit, direct o swapped.
l
High acquisition speed.
l
Protection against electrostatic discharge (ESD) up to 4 kV.
l
Programmable value in case of fault or freezing of last measurement.
l
Easy power supply and serial bus wiring by means of the Seneca Z-BUS housed in the DIN rail.
l
Removable screw terminals for section Max. 1.5 mm
2
cable.
l
DIP switches configurable or software configurable communication parameters.
l
RS485 Serial communication with MODBUS-RTU protocol.
l
Frontal USB Port for MODBUS-RTU configuration and communication.
l
Channels individually activabl and configurable in pairs.
e
For the two inputs of each terminal group, the following common settings are available:
n
Measurement adjustable for temperature or mV.
n
Programmable filter for reading stabilization.
n
Rejection programmable at 50 Hz or 60 Hz.
n
Three configurable acquisition speeds (two 14-bit and one 15-bit).
n
Integrated cold-junction compensation.
GENERAL CHARACTERISTICS
Z-8TC
is a digital converter for thermocouples, with 8 measurement channels, collected into 4
-LAB
terminal groups, insulated up to 1.5 kV, among them, from power supply and from serial
communication line. The module is characterized by a six-point overall insulation.
MODULE DESCRIPTION
13 14 15 16
9 10 11 12
111
m
m
10
mm
2,5
10
mm
2,5
13 14 15 16
1 2 3 4
5 6 7 8
9 10 11 12
17,5 mm
