xVault xNVR200/300/400 User Guide V2.0.0
27
2. Select
Create a Virtual drive,
check
advanced
and click on
Next
3. Select “RaID level from drop down. In this case RaID5 has been selected. the selection will vary depending on requirements
or preference.
4.
do not
select a
security Method.
do not
select Power save Mode.
5. Highlight a single unconfigured drive and click on add to add to drive group.
CaUTiON:
Select only the same part number drive for a single drive group (RaID set). Mixing of different drive part numbers,
different drive interfaces, drive speeds (15k 10k or 7200 RPM) or capacities may result in poor performance or unreliable
operation. You can use the slide bar to view complete drive information.
6. Continue selecting drives until desired number of drives for the RaID set is complete.
NOTe 1:
the total number of drives includes the parity drives for RaID5 and RaID6.
NOTe 2:
this creation process is only true for RaID0, 1, 5 and 6.
NOTe 3:
the selection of drives is for the RaID set only. It does not include hot or global spares. that is done in a separate
process.
NOTe 4:
the maximum number of drives that can be selected in a single RaID set is 32.
Содержание XVAULT xNVR200
Страница 50: ...xVault xNVR200 300 400 User Guide V2 0 0 50 Notes...
Страница 51: ...xVault xNVR200 300 400 User Guide V2 0 0 51 Notes...
Страница 52: ...xVault xNVR200 300 400 User Guide V2 0 0 52...
