MI00562-2-EN
INSTALLATION MANUAL
2/4
Dimensions LxHxD
95 x 75 x 35 mm;
Weight:
≈ 150 g;
Enclosure:
PA6, black
LED
STATUS
LED meaning
PWR/COM Green
ON
The device is powered correctly
PWR/COM Green
Flashing
Communication via RS485 port
D-OUT Yellow
ON
Digital output activated
ASSEMBLY
The device can be mounted in any position, in compliance with the expected environmental conditions.
Magnetic fields of considerable magnitude can alter the measurement: avoid proximity to permanent magnetic fields,
solenoids or ferrous masses which induce strong alterations of the magnetic field; possibly, if the zero error is greater than
the declared error, try a different arrangement or change orientation.
CAUTION
USB PORT
The front USB port allows easy connection to configure the device using the configuration software.
If it is necessary to restore the initial configuration of the instrument, use the configuration software.
Through the USB port it is possible to update the firmware (for further information please refer to the Easy Setup 2
software).
MODULE LAYOUT
SIGNALS VIA LED ON FRONT PANEL
35 mm
CU
MICROOTG
-A
CU
MICROB
-A-
CU
MICROB
-A-
Configurazione
tramite APP
Android
Configurazione
tramite
software PC
Check that the device in question is included in the list of products supported by the Easy Setup APP in the store.
