MI00150-10-EN
INSTALLATION MANUAL
3/9
TECHNICAL SPECIFICATIONS
STANDARDS
EN61000-6-4
Electromagnetic emissions, industrial environment.
EN61000-6-2
Electromagnetic immunity, industrial environment.
EN61010-1
Safety
Install a fuse with a maximum capacity of 1 A near the module.
ENVIRONMENTAL
CONDITIONS
Temperature:
-10 ÷ + 65°C
Humidity:
30% ÷ 90% non condensing.
Storage temperature:
-20 + 85°
Protection rating:
IP65 (on the front with appropriate gasket)
INSULATION
2500 Vdc between each pair of ports (including those belonging to the optional board)
POWER SUPPLY
S311D-XX-L: 10 ÷ 40 Vdc, 19 ÷ 28 Vac, 50 ÷ 60 Hz, max. 3 W
S311D-XX-H: 85 ÷ 265 Vac, 50 ÷ 60 Hz, max. 3 W
CONNECTIONS
Removable screw terminals, 3.5 mm/5.08 mm pitch
DIGITAL
INPUT
Type: Reed, Npn (2 wires), npn 24 V (3 wires) or pnp 24 V (3 wires), NAMUR, Photoelectric
(Astra), Hall, 24 V input, TTL, Variable reluctance.
Absorbed current: max. 7 mA
Vmax.: 28 Vdc
Sensor power supply: 17 Vdc
Frequency band: 0.00014 Hz ÷ 10 kHz
Frequency resolution: < 0.05 %
ANALOGUE
OUTPUT
Applied current: 0 ÷ 20 mA, max. load resistance 500 W
Voltage: 0 ÷ 10 V, min. load resistance 1 kW
Configurable start and end of scale
Resolution: 2 mA / 1 mV
Response time: 5 ms
Maximum measurement field errors:
Calibration error: 0.1%
Thermal coefficient: 0.01%/°K
Linearity error: 0.05%
EMI (electromagnetic interference): < 1%
DIGITAL OUTPUT
Open Collector type, Imax: 50 mA, Vmax: 30 V
RELAY OUTPUT
Capacity: 8 A / 250 Vac (available only on optional board)
AUX. DIGITAL INPUT
Optoinsulated, Vmin: 10 V, Vmax: 30 V (available only on optional board)
