background image

MODULE LAYOUT

Weight:

 170 g; 

Enclosure:

 Self-extinguishing PC/ABS material, black.

2/8

PRELIMINARY WARNINGS

The word 

WARNING

 preceded by the symbol   indicates conditions or actions that put the user's safety at 

risk. The word 

ATTENTION

 preceded by the symbol 

 indicates conditions or actions that might damage the 

instrument or the connected equipment.

The warranty shall become null and void in the event of improper use or tampering with the module or devices 

supplied by the manufacturer as necessary for its correct operation, and if the instructions contained in this 

manual are not followed.



96 mm

98 mm

48 mm

WARNING

: The full content of this manual must be read before any operation.

The module must only be used by qualified electricians.

Specific documentation is available at www.seneca.it/prodotti/s311d

Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).

The symbol on the product or its packaging shows the product must be surrendered to a collection centre 

authorized to recycle electrical and electronic waste.

The module must be repaired and damaged parts replaced by the Manufacturer.

The product is sensitive to electrostatic discharges. Take appropriate measures during any operation.

BUTTON POSITION

4-6-8-11-DIGIT DISPLAY

A1: Alarm 1 LED

A2: Alarm 2 LED

OK/MENU KEY

UP KEY

DOWN KEY

Содержание S311D L Series









Отзывы: