manualshive.com logo in svg

Sencore SP395, Руководство по эксплуатации

Поделиться
Скачать
Sencore SP395 Скачать руководство пользователя страница 22

SP395 SoundPro Audio Integrator  

Form7492 

Operation Manual 

 

17

Menu Overview 

 
All user selections to configure the Audio Integrator are performed with indications in the 
display screen. The Audio Integrator includes a main menu with eight categories of tests in 
which to choose from. Choosing a category in the main screen results in a submenu. The 
submenu lists all the tests available in that category.  

 

Note: Some of the tests shown in the submenu screens may not be included in your Audio 
Integrator. These test features may be purchased as Software Additions to your 
instrument. 

 

 

1.

 

Main Menu:

 Opening menu screen listing eight categories of Audio Integrator tests. 

2.

 

SPL Submenu:

 Appears when the SPL selection is made in the main menu. This 

submenu lists the sound level measurements available for selection using the Audio 
Integrator. 

3.

 

Acoustics Submenu

: Appears when the Acoustics selection is made in the main menu. 

This submenu lists the acoustic analyzing tests available for selection using the Audio 
Integrator. 

Note: The Multi-Band Decay tests is available as a firmware option.

 

It 

appears in submenu but cannot be implemented without purchasing an unlock code.

 

Содержание SP395





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды