SDI2X
– User Manual
Page 47 (61)
Add Manager
Clicking this button prompts the user for the IP
address of the SNMP trap manager.
Delete All
Clicking this button prompts the user to confirm
the deletion of all SNMP trap manager IP
addresses. If the user confirms deletion all SNMP
trap manager IP addresses will be removed.
Delete Single Entry
Highlight a single SNMP trap manager IP address
and click this button to delete the entry. A prompt
will appear confirming the deletion of IP address.
5.2.12 Syslog
The SDI2X can be configured to send error and event logs formatted in the syslog
protocol to a remote user specified Syslog server.
State
Enabled
Disabled
Enable or Disable sending messages to Syslog
server.
Network
Protocol
UDP
TCP
Select which network protocol used to transmit
to the Syslog server
IP
Address
Four decimal octets:
XXX.XXX.XXX.XXX
IP of the Syslog server. 0.0.0.0 and
255.255.255.255 are not permitted
Port
0 - 65535
Destination port of the Syslog server
5.3 Reporting Panel
The Reporting control panel in the SDI2X will provide the user with a list of active
alarms, as well as a means to log the detected events. Active alarms are constantly
updated to reflect the real-time state of the unit.
Action
Button
Description
Action
Range
Description