SDI2X
– User Manual
Page 40 (61)
All settings will be returned to the factory defaults
except
the network management ports
TCP/IP settings.
All event logs will also be cleared so be sure to save any logged data prior to resetting
the unit.
The SDI2X will prompt the user to confirm the action.
Yes
Confirm and execute the reset to default settings action. The unit will
reboot following this selection.
No
Deny the request and close the Reset to Defaults request window.
5.2.8
UID Indicator
With the small size of the SDI2X, and the ability to deploy up to three of these in a single
RU space it would be nice to have a feature that would allow a single unit, in a densely
populated system, be easily identified. The answer to this is the UID indicator. The
SDI2X has a blue LED located on the front and rear panels that can be controlled
through the web interface to provide easy detection of the units’ location.
5.2.9
Unit Alias
The configuration button for this feature is found under the General Settings title ribbon
of the Admin control panel.
The Unit Alias is a unique name or description the user can assign to the SDI2X. The
‘Alias’ will be available on the unit web client and front panel.
Setting
Description