Sencore S8100, Инструкция по эксплуатации

Страница: 6 / 56

Warning! Failure to comply with the instructions could cause accidents with potentially life-threatening inju-
ries.
Caution! Failure to comply with the instructions could result in damage to the equipment or other material
damage.
Carefully read the operating instructions. This applies before placing the equipment into operation and before
any cleaning, maintenance or assembly work.
Always wear the prescribed clothing.

Chap. 3.3, page 8
Always wear sturdy shoes with good grip.
Wear safety gloves. This applies to all work with or on the equipment.
Before starting the engine, put on hard hat, hearing protection, face shield and safety glasses.
Switch off the engine!
Smoking is prohibited anywhere near the power tool and in the location where it is refueled!
Keep the power tool and fuel canisters away from open flames.
Warning: Danger of poisoning! - The power tool generates exhaust gases.
- Gasoline vapors are toxic.
- Dangerous dust emissions when working.
Warning: Kickback!
Notes in chap. 7.2 as of page 27 must be observed under all circumstances!
Warning: Danger of fire from sparks.
Wear breathing protection equipment.
Never use toothed circular saw blades such as the type used to cut wood products.
Never use a damaged cutoff wheel.
Only use cutoff wheels approved for a speed of ≥ 4,550 min
-1
[4,550 RPM].
Vibrator dial for interim emptying of the air filter

Chap. 8.4, page 29
Noise level L
WA
= 110 dB(A)
AutoLube = Smart lubrication
Fuel tank

Chap. 5.5, as of page 18
Oil tank (green cap)

Chap. 5.5, as of page 18
Starting notes

Chap. 6, as of page 22
Auto
Lube
6 SENCORE S8100 CUT-OFF SAW MANUAL