Sencore S8100, Инструкция по эксплуатации

Страница: 33 / 56

8.7 Mainenance Plan
The following notes refer to regular usage situation.
Under special conditions, such as long daily working times, the maintenance
intervals stated must be reduced accordingly.
Perform maintenance work at regular intervals.
Charge a specialist workshop authorized by us if you cannot perform all work on
your own.
The owner of the power tool is also responsible for:
•
Damage from unprofessional or belated maintenance or repair work
•
Subsequent damage – also corrosion – in case of improper storage
Once after 5 operating hours Before and during each working operation W
eekly
Every 50 operating hours Every 100 operating hours On demand At start-up / annually
Cooling air openings in the
starter housing
Clean X X
Carburetor

Chap. 8.3, page 28
Check idling X
Set idling (screw “T”) X
Set carburetor (screws “L”/”H”)
(for specialist workshops only)
X
Air filter

Chap. 8.4, page 29
Interim emptying of the air filters
X X
Clean air filter thoroughly X X
Replace X
Screen filter of the water sup-
ply line

Chap. 8.2, page 28
Clean X X
Spark plug

Chap. 8.5, page 30
Check firm seat of ignition cable and spark
plug connector
X X
Check electrode distance and replace spark
plug if required
X X
Replace X X
All screws in reach
(except for adjustment screws)
Re-tighten
X X X
Operating units
(stop button/switch, throttle control,
throttle control lock, starter)
Check function X
Entire power tool Visual condition inspection
•
Check cutoff wheel and muffler for damage.
•
Check tank cap for tightness
X
•
Check ribbed belt tension

chap. 5.6, page 19
X
Clean X X X
SENCORE S8100 CUT-OFF SAW MANUAL 33