EN-10
EN
Variable Temperature Kettle
SWK 157XXX-NAB1 / SWK 1571BL-NAB1 / SWK 1572RD-NAB1 / SWK 1573CO-NAB1 / SWK 1574BR-NAB1
2014
10/2014
automatically (switches to stand-by mode). The lights of button B
2
and the water level mark A
7
will switch off. The current water temperature will be shown on the display B
1
.
Note
:
This mode can be canceled at any time by pressing button B
2
.
4.3
Heat water to a preset temperature and maintain the preset temperature
Use button B
3
to set the heating temperature 122, 140, 158 or 185°F (50, 60, 70 or 85°C). The
temperature setting changes each time button B
3
is pressed. Button B
3
and the water level
mark A
7
will be lit. The set temperature will fl ash on the display B
1
. After the temperature is
set, the variable temperature kettle will start heating the water. Display B
1
will switch to the
current water temperature display mode. The set temperature is indicated by the “•” symbol lit up
on the display B
1
. A beep indicates that the water has been heated to the preset temperature.
Afterwards, the variable temperature kettle will switch to the maintaining temperature mode. The
water temperature will be maintained for 30 minutes. The variable temperature kettle will then
turn off (switches to stand-by mode). The lights of button B
3
and the water level mark A
7
will
switch off. The current water temperature will be shown on the display B
1
.
Note
:
This mode can be canceled at any time by pressing button B
3
.
4.4
Boil water, cool water to a preset temperature and maintain the preset temperature
Use the button B
3
to set a temperature of 122, 140, 158 or 185°F (50, 60, 70 or 85°C), to which the
water should cool after being boiled, and then press button B
4
. When buttons B
3
–
4
and the
water level mark A
7
are lit, it is heating the water. The set temperature will fl ash on the display
B
1
. The variable temperature kettle will start the boil water mode. Display B
1
will switch to the
current water temperature display mode. The set temperature is indicated by the “•” symbol lit
up on the display B
1
. Boiled water is indicated by a sound (5 beeps). The light of button B
4
will
switch off. As soon as the boiled water cools down to the preset temperature, a beep will be made
and the variable temperature kettle will switch to the maintaining temperature mode. The water
temperature will be maintained for 30 minutes. The variable temperature kettle will then turn off
(switches to stand-by mode). The light of button B
3
and the water level mark A
7
will switch off
and the current water temperature will be shown on the display B
1
.
Note
:
The boil water mode can be canceled by pressing button B
4
again. The temperature setting /
set water temperature maintenance mode can be canceled at any time by pressing button B
3
.
4.5
Boil water with extended boil time, cool water to a preset temperature and maintain the preset
temperature
Use the button B
3
to set a temperature of 122, 140, 158 or 185°F (50, 60, 70 or 85°C), to which the
water should cool after being boiled, and then press button B
2
. When buttons B
2
–
3
and the
water level mark A
7
are lit, it is heating the water. The set temperature will fl ash on the display
B
1
. The variable temperature kettle will start the boil water with extended boil time mode. Display
B
1
will switch to the current water temperature display mode. The set temperature is indicated
by the “•” symbol lit up on the display B
1
. The water will heat up to 212°F (100°C) and then will
be kept at a boil for a further 3 minutes. The end of the extended boil time mode is indicated by
a sound (5 beeps). The light of button B
2
will switch off. As soon as the boiled water cools down to
the preset temperature, a beep will be made and the variable temperature kettle will switch to the
maintaining water temperature mode. The water temperature will be maintained for 30 minutes.
The variable temperature kettle will then turn off (switches to stand-by mode). The light of button
B
3
and the water level mark A
7
will switch off and the current water temperature will be shown
on the display.
