Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
EN
EN-7
Copyright © 2019, Fast ČR, a.s.
Revision 08/2019
•
If you want to vacuum hard and smooth surface, move the bristles out of the nozzle, by turning the flap
accordingly.
Turning your vacuum cleaner on and off
To switch your machine on or off, press the START / STOP button on the vacuum cleaner body.
Adjusting the suction strength
The suction strength may be adjusted by moving the rider on the vacuum cleaner body (small range) or by the
moveable rider on the hose handler.
Tip:
If the hose holder becomes blocked when vacuuming, disconnect it from the telescopic tube and also
disconnect the hose from the vacuum cleaner body. Then place the holder inside the suction hole on
the vacuum cleaner body and vacuum the stuck dirt out.
Temporary interruption of the vacuuming process
If you want to temporarily stop the vacuuming process, place the telescopic tube using the notches on the floor
hose into one of the parking positions - at the back or bottom of the vacuum cleaner.
Caution:
Do not move the appliance from place to place if the hose is in the parking position! You may
brake off the parking position holder!
Using your accessories
A combination nozzle is located In the bottom part of the vacuum cleaner:
•
When in the standard setting you can use it as a slit nozzle for vacuuming hard to reach places (e.g. windows,
corners, bookshelves, area between mattresses, upholstery, etc.).
•
By extending the brush you can use it as a pillow hose (e.g. vacuuming of beds, upholstery, etc.).
Ending the vacuuming process
When you finish vacuuming, switch the vacuum cleaner off by pressing the START/STOP button and then
disconnect the supply cable plug from the socket.
To wind the power cord back to the vacuum cleaner, press and hold the winding button with one hand. Hold the
cable with your other hand to protect the vacuum cleaner input area from damage.
Tip:
If the winding process stops and part of the power cord is still outside, release the winding button and
pull the cable out again by about 50 cm and press the winding button again and repeat the winding
process.
Carrying your vacuum cleaner
If you need to carry the vacuum cleaner, hold it only by the handle.
STORAGE AND ACCESSORIES
Before storage you may disassemble your vacuum cleaner into its individual parts or you may store it assembled
with the telescopic tube stored in one of the "parking" positions (the rear or bottom position).
CLEANING AND MAINTENANCE
Caution:
Before cleaning disconnect this product from the power source.
