EN-6
EN
Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
Copyright © 2019, Fast ČR, a.s.
Revision 08/2019
Attach the floor inlet nozzle to the telescopic tube
Make sure the floor nozzle is attached the narrower part of the telescopic tube.
Adjust the length of the telescopic tube
Adjust the length of the telescopic tube as follow: Move and hold the button on the tube forward as shown by
arrows and adjust the length of the tube as needed. Release the button and move the tube slightly forward until
you hear a "click". The telescopic tube is now securely fixed in position.
Select the type of dust container
It is possible to use this vacuum cleaner both with and without bags. Choose your preferred vacuuming mode and
depending on that insert either a dust container (pic. 1) or a dust bag (pic. 2).
picture 1
picture 2
Note:
When using the dust bag do not forget to insert the supplied plastic foam filter into the grooves in
front of the motor.
INSTRUCTIONS FOR USE
Connecting your vacuum cleaner to the electrical power network
Pull the plug attached to the power cord out from the vacuum cleaner until the desired length of the cable is out of
the appliance. Insert the plug to the wall outlet.
Caution:
Yellow marking on the supply cable warns that the cable is close to its end. Do not pull the cable
more than to the red marking.
Adjusting the floor inlet nozzle according to the floor surface.
You may set the inlet nozzle according to the floor surface by adjusting the inlet flap:
•
If you want to vacuum carpets, close the bristles of the inlet inside the inlet nozzle, by turning the flap
accordingly.
