2 in 1 Cordless Vacuum Cleaner
SVC 7612VT / SVC 7614TQ
EN
EN-7
2015
09/2015
•
Disassemble the upright vacuum cleaner in reverse sequence . To remove the floor nozzle A
qs
it is
first necessary to press button A
qa
and to hold it pressed down . This will release the nozzle A
qs
and only then will it be possible to take it off . To take the hand vacuum cleaner off the body of the
upright vacuum cleaner A
6
, first press the button A
5
. Hold down the button A
5
and take off
the hand vacuum cleaner .
3. Assembling and disassembling the charging base
•
Assemble the charging base A
ql
by inserting the top part into the bottom part as shown in figure
D . The connection of these two parts is signalled by an audible snap .
D
•
When disassembling the charging base A
ql
, it is necessary to first release the clip on the underside
of the base A
ql
. Slide the clip in the direction of the arrow shown on the underside of the base A
ql
and then take the top part of the base A
ql
off the bottom part .
E
1
1
Clip
