04/2021
- 9 -
Copyright © 2021, Fast ČR, a.s.
USING THE COOKIE MAKER ATTACHMENT
1. Place the prepared dough on to the hopper
B2
. Slide the cookie maker
B15
to the left or
right to set the desired cookie shape.
2. Insert the power plug into a power socket. Set the required speed using the speed control
knob
A12
. When starting it for the first time, we recommend that you set speed 3 and then
increase or decrease it as required.
3. Use the pusher
B1
to push the dough through the feed tube
B3
. The food processor will
push the dough out in the required shape that you set using the cookie maker
B15
.
We recommend that you place a tray or your palm underneath the pushed out dough. Then
cut the formed dough into smaller pieces.
Attention:
Do not use fingers or other items to push the dough in. Always use the
pusher
B1
.
4. When you have finished using the food processor, turn it off by setting the speed control
knob
A12
to the OFF position.
5. Clean out the attachment after each use according to the instructions in chapter Cleaning
and maintenance.
BLENDING
ASSEMBLING AND DISASSEMBLING THE BLENDER
1. On to the blending jar
C4
, place the outer lid
C2
so that its edges copy the neck of the jar,
and push it down thoroughly along its entire perimeter. Into the hole in the lid
C2
, place the
inner cap
C1
and push it down all the way.
2. Make sure that the food processor is turned off and disconnected from the power socket.
The multi-function head
A7
must be tilted down in the horizontal position and the whisk,
beater or kneading attachments must be removed. Release and remove the top attachment
hub cover
A6
. Place the assembled blending jar on to the top hub and pulling it gently
turn it in the direction of the symbol all the way. The safety mechanism will prevent the
blender from starting unless it is correctly secured to the multi-function head
A7
.
3. To disassemble proceed in the reverse sequence.
USING THE BLENDER
1. The blender is intended for preparing meals and drinks such as milkshakes, creamy soups,
sauces, spreads, fresh baby foods, etc. It is not intended for juicing fruit and vegetables,
preparing potato purée, yeast dough or for whipping egg whites.
2. Assemble the blender according to the instructions in chapter Assembling and
disassembling the blender, and put the ingredients (larger pieces need to be cut up in
advance) into the blending jar
C4
.
Note:
The maximum capacity of the blending jar
C4
is 1.5 litres. Never fill it past
the maximum mark. When processing hot liquids or liquids that expand in
volume during the blending process, it is recommended to fill the blending
jar to no more than
⅔
of its maximum capacity.
3. Make sure that the food processor is correctly assembled and that the speed control knob
A12
is set to the OFF position. Connect the power cord to a power socket. Set the required
speed using the speed control knob
A12
. We recommend to first set a slower speed to
allow the ingredients to mix together. Then the speed may be increased. The pulse level
is appropriate when you wish to blend food only very quickly. To start the pulse level, turn
the speed control knob
A12
to the PULSE position and hold it in this position for a moment.
As soon as you release the speed control knob
A12
, it will automatically return to the OFF
position.
Attention:
Hot liquids up to a temperature of 55 °C may be processed in the blending
jar. The maximum operating time of the blender is 2 minutes. Do not leave
the appliance in continuous operation for longer than indicated above. Then
allow it to cool down for 30 minutes.
4. While blending, you may add food or liquids to the blending jar
C4
through the hole in the
lid
C2
after removing the inner cap
C1
. Never open the outer lid
C2
during operation. When
processing hot liquids, the inner cap
C1
must remain closed.
5. In the event that food is sticking to the blade assembly
C6
or the walls of the blending jar
C4
, turn the appliance off by turning the speed control knob
A12
to the OFF position and
disconnect it from the power socket. Make sure that the blade assembly
C6
has stopped
rotating. Carefully remove the assembled blending jar from the multi-function head
A7
by
turning it in the direction of the symbol . Take off the lid and using a plastic spatula,
clean the blade assembly
C6
and the inside of the blending jar
C4
. Put the lid back on and
reattach the blender assembly to the multi-function head
A7
. Plug the power cord into
a power socket and continue blending.
6. After you have finished using the appliance, set the speed control knob
A12
to the OFF
position and disconnect the power cord from the power socket. Check that the blade
assembly
C6
has stopped rotating and carefully take the blending jar assembly off the multi-
function head
A7
. Put the cover
A6
back in its place and use a soft plastic spatula to remove
food from the blending jar
C4
.
7. Disassemble the assembled bowl and clean the individual parts after each use according to
the instructions in chapter Cleaning and maintenance.
ADVICE AND TIPS FOR BLENDING
■
First cut food with a firm consistency such as fruit and vegetables into smaller pieces
measuring 3 cm and only then blend it.
■
First, blend a smaller amount of ingredients and then gradually add more ingredients
through the hole in the lid
C2
while blending. In this way, you will achieve better results
than by adding all ingredients into the blending jar
C4
at once.
■
If you need to blend food of a solid consistency together with liquids, we recommend that
you first blend the food of solid consistency and a part of the liquids. Then gradually add the
remaining liquids through the hole in the lid
C2
while blending.
■
To blend very thick liquids, we recommend using the pulse level so that the blade assembly
C6
does not get jammed too often. Start the blender repeatedly in short intervals.
■
Ice cubes must be processed immediately upon being removed from the freezer. When the
ice starts to melt, the ice cubes will stick together and it will not be possible to blend them.
QUICK GUIDE TO PROCESSING INGREDIENTS
Ingredients
Speed selection
Recommended
blending time
Fruit, vegetables cut into smaller pieces
5–6
30 s
Baby food
5–6
40 s
Spreads, dressings, marinades
3–4
30 s
Smoothies and cocktails
6 to MAX
40 s
Soups
6 to MAX
30 s
Ice cubes
PULSE
Note:
The above food processing times are only a reference. The actual blending
time depends on the size of the ingredients, their amount and the required
final consistency.
CLEANING AND MAINTENANCE
■
Before cleaning the food processor, always switch it off by setting the speed control knob
A12
to the OFF position and disconnect it from the power socket.
■
Disassemble the food processor into its individual parts. Wait until moving parts come to
a complete stop before disassembly.
■
Thoroughly wash the used removable parts after every use using warm water with a neutral
dishwashing detergent. Then rinse them under clean running water and wipe them dry with
a fine wiping cloth or allow them to dry naturally. After washing and drying, we recommend
to coat the grinding blade
B6
and the grinding plates
B8
,
B9
and
B10
with cooking oil.
■
If you whisked egg whites, first rinse the bowl
A10
and the beater
A4
under cold water.
If you were to use hot water, the egg white remains would harden and their removal would
be more difficult.
■
Clean the mixing container
C4
by filling it with 0.5 litre of clean water and a few drops of
kitchen detergent and then assemble the blender and run it for 10 to 15 seconds. Then turn
off the food processor, disconnect it from the power socket, and after the rotating parts have
come to a stop, remove the blending jar assembly. Empty out the contents of the blending
jar
C4
and then thoroughly rinse out the blending jar
C4
with clean water and wipe dry.
■
If more thorough cleaning is required, the cuff
C5
with blade assembly
C6
may be removed
using a special wrench that can be ordered free of charge at an authorised service centre.
After cleaning, it is necessary to install the cuff
C5
with blade assembly
C6
back in its place
and to properly tighten it using the wrench.
Attention:
When cleaning, be very careful not to injure yourself on the sharp cutting edge.
■
The metal parts of the meat grinder, the blade assembly
C6
and attachments
A3–A5
are not intended for washing in a dishwasher. Other removable parts may be washed in
a dishwasher.
■
For cleaning the base unit
A11
and the multi-function head
A7
, use a cloth lightly dipped
in a weak detergent solution. Then wipe everything with a clean dampened cloth and
thoroughly wipe dry.
■
For cleaning, do not use solvents or cleaning agents with abrasive effects. Otherwise, the
surface of the appliance may be damaged.
■
Do not submerge the food processor or its power cord in water or any other liquids.
STORAGE
■
When not using the food processor, store it in a clean, dry place out of children’s reach.
Make sure that the multi-function head
A7
is tilted down into the horizontal position.
TECHNICAL SPECIFICATIONS
Rated voltage range ...............................................................................................................................220−240 V
Rated frequency...........................................................................................................................................50/60 Hz
Rated power input ........................................................................................................................................1 000 W
Noise level .......................................................................................................................................................85 dB(A)
The declared noise emission level of the appliance is 85 dB(A), which represents a level A of acoustic
power with respect to a reference acoustic power of 1 pW.
