04/2021
- 4 -
Copyright © 2021, Fast ČR, a.s.
■
Hot liquids up to a temperature of 55 °C may be processed in the
blending jar. Be especially careful when handling hot liquids. Hot steam or
splashing hot foods and liquids may cause scalding. Never start the blender
without the lid properly seated in position. When processing hot liquids, do
not remove the inner cap during operation. Do not touch the hot surface.
Use the handle to carry the blending jar when it is hot.
■
The maximum continuous operating time is 10 minutes. Do not exceed
the maximum operating time of 5 minutes when in the kneading mode
and do not exceed the maximum operating time of 2 minutes when using
the blender. Before starting it again, allow the appliance to cool down for
30 minutes.
■
Always turn off the appliance, disconnect it from the power socket when
not be using it, when leaving it without supervision, and before assembling,
disassembling, cleaning or moving it. Prior to disassembling the appliance
and replacing accessories or accessible parts that move during use, wait
until all moving parts come to a stop.
■
Clean it according to the instructions in chapter Cleaning and maintenance.
■
Never wash the appliance under running water or submerge it in water or
another liquid.
■
Do not turn on the appliance when it is empty. Incorrect use of the appliance
may negatively affect its lifetime.
■
Ensure that the power plug contacts do not come into contact with water
or moisture. Do not place heavy items on the power cord. Make sure that
the power cord does not hang over the edge of a table or that it is not
touching a hot surface.
■
Disconnect the power cord from the power socket by pulling on the plug,
never pulling on the cord. Otherwise, this could damage the power cord or
the socket.
■
If the power cord is damaged, have it replaced at a professional service
centre. It is forbidden to use the appliance if it has a damaged power cord.
■
To avoid the danger of injury by electrical shock, do not repair the appliance
yourself or make any adjustments to it. Have all repairs performed at an
authorised service centre. By tampering with the appliance, you risk
voiding your legal rights arising from unsatisfactory performance or quality
warranty.
