Sencor STM 3725BL, Перевод оригинального руководства

Страница: 4 / 11

- 4 -
09/2019
Copyright © 2019, Fast ČR, a.s.
■
Before putting the appliance into operation, check that it is correctly assembled
and that the arm is in the horizontal position.
■ Hot liquids up to a temperature of 80 °C may be processed in the blending jar. Be
especially careful when handling hot liquids. Hot steam or splashing hot foods and
liquids may cause scalding. Never start the blender without the lid properly seated
in position. When processing hot liquids, do not remove the inner cap during
operation. Do not touch the hot surface. Use the handle to carry the blending jar
when it is hot.
■ Do not attempt to grind bones, nut shells or other hard ingredients.
■
When kneading, beating or whipping, do not leave the appliance in continuous
operation under a heavy load for longer than 6 minutes. Do not leave the blender
running for longer than 1 minute. In both cases, allow the appliance to cool down
for at least 10 minutes.
■
When beating, kneading or blending, do not tilt out the arm or put your hands
or items, such as a kitchen knife, fork or wooden spoon, into the stainless steel
bowl. Do not touch the rotating attachments and ensure that foreign items such
as clothing, hair, etc. are kept away. An injury could occur or the appliance could
be damaged.
■ If an item, such as a spoon, falls into the mixing bowl while the appliance is running,
immediately set the speed control knob to position 0 (stand-by mode), disconnect
the power cord from the power socket and take the item out of the bowl.
■ If ingredients stick to the attachments or the inside of the bowl, turn off the
appliance and disconnect it from the power socket. Use a spatula to clean the
attachments and the inside of the bowl. Then you can continue mixing.
■
Do not turn the appliance on when empty. The incorrect use of the appliance may
negatively affect its lifetime.
■
Before storing the appliance, check that the stand arm is tilted to the horizontal
position.
■ Do not place any items on to the appliance. Do not insert any objects into the
ventilation openings of the appliance.
■
Do not put the accessories of the appliance into a microwave oven.
■ Be very careful when there is a hot liquid inside the bowl because the hot liquid
may splash out of the appliance as a result of a sudden release of steam.
■
Never process boiling liquids.
■
When filling the stainless steel bowl, do not exceed the maximum capacity level
marked on it.
■
Always turn off the appliance by setting the speed control knob to position 0
(stand-by mode). After turning it off, always wait until the moving parts come to
a complete stop, and then disconnect it from the power socket before tilting open
the head, before opening or removing any attachments