EN-4
EN
Sandwich Maker with Removable Plates
SSM 9300
2011
10/2011
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND STORE THESE INSTRUCTIONS FOR FUTURE USE.
•
Before connecting the appliance to a power socket check that the technical details on the appliance
label match the electrical voltage in the socket.
•
Only plug the appliance into a correctly grounded socket.
•
This appliance is designed for use indoors. Do not use this appliance for commercial purposes.
•
Do not use the appliance in industrial surroundings or outdoors!
•
Do not use the appliance for any other than its intended purpose.
•
Do not place the appliance on or near an electric or gas stove or other sources of heat.
•
Do not place the appliance at the edge of a utility surface or on an unstable surface. The appliance
must be located on a stable and even surface.
•
This appliance is supplied with three pairs of removable baking plates. Only use the same pair of
baking plates at any one time. Ensure that the baking plates are properly inserted in the appliance
before turning it on.
•
After connecting the appliance into an electric power supply the baking surface and the outer
surface of the appliance begins to heat up. Do not touch the hot surface. To close and open the top
baking plate use the thermally insulated handle and for removing the fi nished meal use a wooden
or heat resistant plastic spatula.
•
Allow adequate air circulation around the appliance when in use. Do not place any objects on the
heated surface of the appliance.
•
Food may catch on fi re during the cooking process, therefore check the sandwich maker regularly.
If you notice smoke, disconnect the power plug from the socket and extinguish the fi re.
•
Always turn off the appliance and disconnect it from the power socket if you leave it without
supervision or if you will not be using it and before changing the baking plates or cleaning it.
•
Allow the appliance to fully cool down before changing the baking plates, moving, cleaning or
storing it.
•
Clean the grilling surfaces after each use, see the chapter Cleaning and maintenance.
•
To avoid any injury by electrical shock, do not clean the appliance under running water and do not
submerge in water or any liquid.
•
Ensure that the power cord does not come into contact with water or moisture or heated surface.
•
Do not disconnect the appliance from the power socket by pulling on the power cord. This could
damage the power cord or the power socket. Disconnect the cord from the power socket by gently
pulling out the plug of the power cord.
•
If the power cord is damaged, have it replaced at a technical service centre. It is forbidden to use
the appliance if it has a damaged power cord or plug.
•
To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any
adjustments to it. Have all repairs or adjustments of the appliance performed at an authorised
service centre. Tampering with the appliance during the warranty period may void the warranty
policy.
