EN - 10
LISTENING TO USB
USB OPERATION
1. Press the
Source
button on unit or on remote control to select
„USB“
mode.
2. Connect the USB to the USB INPUT. The LCD will show the total number of tracks stored in the
USB. The playback stars from track 1 automatically after reading the USB.
3. To pause playback, press
/ Scan/ PAIR
button on unit or
key on remote control.
The current playing time will flash on the display.
4. To resume playback, press
/ Scan/ PAIR
button on unit or
key on remote control again.
5. Press the
Mem./
button on unit or on remote control to stop playing.
The display will show total number of USB and STOP.
6. Proceed program play/repeat play (repeat 1- repeat folder - repeat all)/random play/intro play
operation as the same described in above “CD/MP3 OPERATION”.
7. It supports 32GB (USB)
CAUTION
DO NOT USE ANY USB EXTENSION CABLE FOR CONNECTING THE USB BAR WHICH MAY
CAUSE HARMFUL INTERFERENCE.
DUE TO HIGH VARIABILITY OF USB DEVICES, IT IS NOT POSSIBLE TO ENSURE FOR ALL
MODELS COMPATIBILITY WITH THE PRODUCT.
BLUETOOTH OPERATION
1. Press the
Source
button on unit or on remote control to switch to BLUETOOTH function, the
LCD will display
„BT“
and the Pair/Standby indicator will flash at high speed.
2. Turn on the Bluetooth function on the device, scan the unit “SPT5800” and connect, then input
the password 0000 if required, the Pair/Standby blue light will light up to indicate connection
done, and the display will show “bt”. Press
/ Scan/ PAIR
button on the unit or play key on the
device to start playback. If the unit can’t connect the relative Bluetooth within 2 minutes, press
the
/ Scan/ PAIR
button on unit or PAIR key on remote control to reconnect.
3. Rotate the VOLUME knob to your desired level.
4. Press
TUN+/
or
TUN-/
on the unit or on remote control to choose the desired track.
5. To stop playback, press
/ Scan/ PAIR
button on unit or
key on remote control.
NOTE: The Bluetooth works best within 10 meters.
AUX-IN OPERATION
1. Press the FUNCTION button on unit or on remote control to select
„AUX“
mode.
2. Insert the AUX line plug into the AUX IN jack (Φ3.5mm) on the player, music from the device
would be amplified and exported from the speakers.
3. Adjust the volume on the unit or on the device to your desired level.
4. Proceed play/pause and next/previous on the connected device.
