Sencor SMW 7625, Инструкция по эксплуатации

Страница: 3 / 80

EN–3
EN
Microwave Oven
SMW 7625
INSTALLATION
1. Make sure all the packing materials, such as plastic bags, polystyrene etc., are removed from the inside of the oven.
2.
WARNING: Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface,
broken or loose door hinges and latches and dents inside the cavity or on the door. In case of any damage, do not
operate the oven and contact a qualifi ed servise agent.
3. The microwave oven must be placed on a fl at, stable surface to hold its weight and the heaviest food likely to be
cooked in the oven.
4. Do not place the oven where heat, moisture or higher humidity is generated, or near combustible materials.
5. To ensure the correct operation, the oven must have suffi
cient air fl ow. Keep 20 cm free space above the oven, 10 cm
at back and 5 cm at both sides. Do not cover or block any events of the oven. Do not remove the oven‘s feet.
6. Your product has been designed for use as a stand-alone device. It has not been designed to be used as
a built-in appliance.
7. Do not operate the oven without installing the glass tray, the roller ring and power device.
8. Make sure the supply cord is not damaged, placed under the oven or in contact with any hot or sharp surface.
9. Make sure that the electric power socket is easy to reach in case of a quick disconnection of the power cord out of the
socket.
10. Do not use the oven outdoors.
GROUNDING INSTRUCTIONS
This microwave oven must be grounded. The oven is equipped with a power cord having a grounding wire with
a grounding plug. The plug must be connected to the electric power point which is correctly installed and grounded. In
the event of an electrical short-circuit, grounding reduces the risk of electric shock by providing an escape wire for the
electric current. It is recommended to connect the oven to a separate electrical circuit. Using high voltage is dangerous
and may cause fi re or diff erent accident resulting in damage to the oven.
WARNING!
Incorrect grounding socket can lead to the risk of electric shock.
Note:
1. If you have any questions concerning the grounding or electrical instructions, consult them with a qualifi ed electrician
or service agent.
2. Neither the manufacturer or dealer is responsible for any damages to the oven or physical injuries incurred by the
negligence to adhere to the correct electrical connection procedures.
RADIO INTERFERENCE
When using the oven, your radio, television or similar equipment may be disturbed.
In case of interference, it may be reduced or eliminated by taking the following procedures:
1. Maintain the door and the sealing of the oven surface clean.
2. Redirect the radio or television antenna receiver.
3. Move the microwave oven further from the receiver.
4. Plug the microwave oven to a diff erent socket with an independent electrical circuit.