Sencor SLE 2464TCS, Инструкция по эксплуатации

Страница: 22 / 216

20 EN
EN
Revision 09/2016 Copyright © 2016, Fast ČR, a. s.
Installation
Tip:
Full-satellite tuning can result in a very large list of channels, which is difficult to
orient yourself in. This can be avoided by tuning the desired transponders one by one
(channels will be added). Or for example using a network tuning of one satellite and
"additional tuning" of several transponders from other satellites. This allows storing
a reasonably large list of channels.
Example for Skylink Czech Republic:
Advanced Search/Astra 23.5E/Transponder
(EPG)/12071H/Tuning (blue)/Search Type=Network/Enter. (According to the operator table,
the receiver will find and store programs for the entire satellite). Check the parameters
for transponders stored in this manner, in particular symbol speeds that differ from
27.5 Msym/s, or adjust to their actual speeds 29.5 and 29.9 Msym/s, where these
are different for programs on-demand than specified in the broadcast table. Tune each
transponder one by one from the Astra 19.2 E satellite provided you would like to receive
the programs offered by this satellite and that you have a compatible satellite antenna.
NOTICE:
Have a professional install your satellite antenna to ensure you get quality and
uninterrupted reception. The professional will inform you about the technical
parameters (in particular DiSEqC), which he used during the installation process
and which shall be entered into the TV receiver for a successful tuning process.
SLE SLE 2 SLE 3258TCS EN+CZ+SK+HU+PL.indb 20 08.09.2016 0:57:28