Sencor SDF 1371, Инструкция по эксплуатации

Страница: 8 / 64

EN - 8
6. Breakpoint Play: Means, if the machine suddenly loses power during fi le playback or operation,
the user can resume playback from the breakpoint after rebooting. Select “Yes” or “No” to open
or close this function.
7. Brightness: Means the brightness of the machine, ranges 1 to 15. The system defaults “14”.
8. Alarm Setup: Press “ENTER” to set up the Alarm status and time.
9. Date: Press “ENTRE” to set up date, Move “◄” ”►” cursor to switch between years and month.
Move “▲” ”▼” cursor to adjust the data for increasing or decreasing.
10. Mode: Press “ENTER” to choose the time mode. There are “12 hour” and “24 hour” options.
11. Time: Press “ENTER” to set up the time. Move “◄” ”►” cursor to switch between hours and
minutes. Move “▲” ”▼” cursor to adjust the data for increasing or decreasing.
12. Auto Power On: The user can program the machine auto boot in a certain time of his choosing.
Move “◄” ”►” cursor to switch between hours and minutes. Move “▲” ”▼” cursor to adjust the
data for increasing or decreasing. Similarly select “Off ”, “Once” or Every Time” as desired. Press
“ENTER” to save the setting.
13. Auto Power Off : The user can program the machine automatically shut down in a certain time of
his choosing. Move “◄” ”►” cursor to switch between hours and minutes. Move “▲” ”▼” cursor
to adjust the data for increasing or decreasing. Similarly select “Off ”, “Once” or “Every Time” as
desired. Press “ENTER” to save the setting.
8.2 Clock and Calendar Settings
1 .Clock and calendar mode:
In main menu screen or fi le playing screen, press the “CALENDAR” button in the remote control to
enter into clock and calendar screen directly. There are four basic modes, as shown above: Digital
Clock + Simple Calendar, Digital Clock + Detailed Calendar, Analog Clock + Simple Calendar,
Analog Clock + Detailed Calendar. Press “ENTER” button to switch between diff erent modes.
Figure I