- 4 -
10/2019
Copyright © 2019, Fast ČR, a.s.
■
Always hold the cups into which coffee is being brewed by their handle.
Pay extra attention when handling cups filled with hot coffee to prevent
scalding.
■
Regularly inspect the water level in the water tank when using the appliance.
When the water level falls below the minimum water level mark, add water.
Before adding water, first turn the appliance off and disconnect it from the
power socket.
■
Before using the appliance again, turn it off and allow it to cool down for
10 minutes.
■
The appliance is equipped with a safety thermal fuse that automatically
cuts off the electrical circuit when overheating occurs. In the event that
such a situation occurs, disconnect the appliance from the power socket
and allow it to cool down. After it has cooled down, you may continue using
the appliance. Do not fill the water tank with cold water for the purpose of
cooling down the heating element.
■
Always turn off the appliance and disconnect it from the power socket when
not using it, when leaving it without supervision, before disassembling
or assembling it, before filling up the water tank, and before moving or
cleaning it. Allow the appliance to cool down before cleaning or moving it.
■
Keep the appliance and its accessories in clean condition. Clean and maintain
it according to the instructions in chapter Cleaning and maintenance. Never
wash the appliance under running water or submerge it in water or another
liquid.
■
Never move the appliance with the water tank filled with water or with the
kettle located on the hotplate.
■
Make sure that the power cord does not come into contact with a hot
surface and prevent the power plug from coming into contact with water.
■
Disconnect the appliance from the power socket by pulling on the plug,
never pulling on the power cord. Otherwise, this could damage the power
cord or the socket.
■
To avoid the danger of injury by electrical shock, do not repair the appliance
yourself or make any adjustments to it. Have all repairs or adjustments
performed at an authorised service centre. By tampering with the appliance,
you risk voiding your legal rights arising from unsatisfactory performance
or quality warranty.
