Smoothie Maker
SBL 2200WH / SBL 2201GR / SBL 2202BL / SBL 2203OR / SBL 2204RD /
SBL 2205VT / SBL 2206YL / SBL 2207TQ / SBL 2208RS
EN
EN-7
2016
02/2016
INTENDED USE AND FUNCTIONS OF THE APPLIANCE
•
This Smoothie Maker is ideal for preparing fresh fruit or fitness drinks, dairy and other sorts of
cocktails, mixed drinks, excellent salsa, cream soups, sauces and mixed baby foods. It is equipped
with a blade unit with four high-quality stainless-steel blades and a blending containers of two
sizes, which are made of sturdy PVC plastic and also serve as a practical drinking bottle. The lid
has a closable spout to allow easy carrying with no spilling. Both bottles fit perfectly into a car
cupholder. Anti-slip feed with suction cups ensure excellent stability when the Smoothie Maker is
in use. The bottle, lid and blade unit are dishwasher safe.
BEFORE FIRST USE
1. Remove the appliance and its accessories from the packaging.
2. Thoroughly wash all removable parts intended for contact with food (large blending container
A
1
, small blending container A
7
, lid A
6
and the blade unit A
2
) in warm water with a neutral
dish detergent. Then rinse them with clean water and let them dry or thoroughly dry them with
a soft towel.
Warning:
When cleaning the blade unit A
2
, be extra cautious to avoid injury. The blade edges A
2
are
sharp.
ASSEMBLING AND DISMANTLING THE APPLIANCE
•
Before you begin to assemble or disassemble the appliance, make sure the motor unit A
3
is turned
off and unplugged from the wall outlet and the rotating parts are not in motion.
1. Assembling and dismantling the blending container
1.1 Turn blending container A
1
or A
7
so that its neck points upward.
1.2 Place the blade unit A
2
against the neck of container A
1
or A
7
so that the blades point into
A
1
or A
7
. Screw the blade unit A
2
onto the neck of container A
1
or A
7
. Turn the assembled
container downward with the blade unit A
2
.
Note:
Put food and liquids into container A
1
or A
7
before you attach the blade unit to it A
2
.
1.3 To dismantle, proceed in the opposite order.
2. Attaching and removing the blending container from the motor unit
2.1 Place the motor unit A
3
on a flat, dry surface, such as a kitchen counter. Onto the motor unit A
3
,
place the blending container so that the arrow indicator on the blade unit A
2
lines up with the
arrow on the motor unit A
3
. Turn the blending unit clockwise until it attaches firmly to the motor
unit A
3
. If the blending container assembly is correctly attached to the motor unit A
3
, it cannot
be lifted separately.
2.2 To remove the blending container from the motor unit A
3
, proceed in the opposite sequence.
3. Assembling the drinking bottle
To assemble the drinking bottle, screw the lid A
6
onto the neck of bottle A
1
or A
7
. Firmly tighten
the lid A
6
. When carrying, make sure the spout is properly closed, so that the bottle’s contents do
not spill.
