Senci AP2000i, Руководство пользователя, Страница: 94 / 108

The Fuel Petcock knob helps to prevent stale fuel from remaining in the carburetor while storing or transporting the unit. Run the fuel
out by turning the knob to the "OFF" position and letting the engine run until it stops.
NOTE:
FUEL PETCOCK
The Fuel Petcock controls the flow of gasoline from the fuel tank to the carburetor. The
Petcock knob should be in the "ON" position when starting and operating the generator.
The Petcock knob should be in the "OFF" position when the engine is not running and
when storing or transporting the unit.
CHOKE
The Choke is used when starting the engine "cold" (the engine is not hot). Pull out fully on
the choke when starting the engine. Once the engine has warmed and a steady idle is
achieved, push in on the choke. NOTE: When restarting a warm engine the choke is not
necessary.
220/230/240 V AC OUTLETS
The outlets are used to power 220/230/240V Single Phase 50Hz loads requiring up to
1600W continuous power.
This socket is only corresponding to a client, the different laws and regulations according
to the sales area changes corresponding to the socket.
SECTION 3: Getting Started
Remove the generator from its packaging. A
Inspect the generator to ensure that no damage has occurred in shipping or handling. If the unit appears to be damaged, DO NOT add
fuel or attempt to start the generator. Please callSENCI customer service at+86-23-86021111
Check to ensure that you received the following items:
AP2000i 2000W Generator
• 12V Charging Cables
• Bottle of Oil
• Oil Funnel
If you did not receive any of the above items, please contactSENCI customer service at +86-23-86021111
3.1 Unpack the Generator
Italia Star Com Due S.R.L.
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
94