51
•
All handsets ring to incoming calls, or
•
Designate one particular handset to have
the only access to that particular line for
both incoming and outgoing calls.
vi. Press “6” to set Operator for AA: Enter a
two-digit Handset ID (default = Handset 10)
as operator for all call addressed to the
operator in AA operations.
Notes:
1. Only administrator can change AA settings.
2. Because AA setting is stored on the base station,
the handset must be in range with the base to make
changes.
3. The maximum recording time for the greeting
message is 128 seconds.
4. Allowing each line’s AA to be turned on or off
separately is useful if different lines are used for
different purposes.
5. When AA is disabled, the line can only be dedicated
to an individual Handset ID. Group ID (01-09) will
not be accepted.
6. The operator can be any individual handset or a
group; it doesn’t need to be an administrator
handset (Handsets 10 and 11).
7. The minimum number of rings before the AA picks
up cannot be lower than two for the purpose of
receiving the Caller ID message.
Change System Settings by Administrator
1. In addition to AA settings, there are two system
parameters that can be changed by the
administrator: clear (de-register) handset ID and set
the next handset ID to be assigned by the base.
Содержание SR-436
