SENAO SR-436 Скачать руководство пользователя

Страница: 31 / 64

want to disable the Base Station’s Auto-
Attendant function if that interferes with the
external device’s built-in Auto-Attendant.

Handset and Charger Installation

1. Plug the transformer end of the Charger AC/DC

adaptor into a standard AC electric power outlet,
plug the other end into the “DC In” jack on the back
of the Charger.

2. Install battery pack onto the handset.

3. Install handset antenna.

4. Place handset onto the charger front slot. Battery is

fully charged when the corresponding LED turns
green (see Charger Features).

5. The phone system is now ready to perform basic

functions such as making and receiving phone calls
and intercom calls. No base station or handset
programming is needed for basic operations.

Note:

1. Handset(s) packaged along with a Base Station

are pre-registered at the factory. If you have a
new handset, you will need to register the
handset with the base station in order to be
recognized as a member handset by the base(s)
and by other handsets. See Handset
Registration.

2. Fully charge battery packs before first use.

Содержание SR-436

































































Результаты поиска

Содержание SR-436

Отзывы:

Похожие инструкции для SR-436

Бренды по названию

Популярные бренды

SENAO SR-436, Руководство пользователя

Результаты поиска

Содержание SR-436

Отзывы:

Похожие инструкции для SR-436

Бренды по названию

Популярные бренды