NOTES
(1) Make sure that the cable is tied to the cable connector in order to
maintain the radio frequency transmission performance.
(2) The ground plane should be at least 3 meters above the ground.
(3) No obstruction can be present within 3 meters from the antenna (as
shown in Fig 7~9).
(4) Straighten the remaining cable.
(5) Bending cable cord will increase loss of transmission power.
(6) Make a loop before pulling the cable into the house. The loop can
prevent rain from going into the house.
(7) The higher the antenna is installed the better the communication will
be.
(8) Keep the antenna and cable from high-voltage sources to avoid
electric shocks. Don't install the antenna in the rain to avoid
thunder striking.
Over 3 M (correct)
Over 3 M (correct)
Over 3 M (correct)
Over 3 M
(correct)
Less than 3 M
(incorrect)
Less than 3 M (incorrect)
Figure 7
Figure 8
Figure 9
14-EN
