IP address configuration
1)
After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is
on.
2)
For the next steps, refer to your Operating System User Manual.
3)
Once your computer is on, ensure that your TCP/IP is set to
On
or
Enabled
. (In the control panel,
double click Network Connections and then double click on the connection of your Network
Interface Card (NIC). Select
Internet Protocol (TCP/IP)
and then click on the
Properties
button.)
4)
If your PC is already on a computer network, ensure that you have set it to a Static IP Address on
the interface (or Ethernet card that will use the CAP7250AG/CAP7252AG/CAP7253AG) as
192.168.1.21
and the Subnet Mask address as
255.255.255.0
. (Select
Use the following IP
Address
radio button). Once the computer has been prepared, proceed to setting up the
CAP7250AG/CAP7252AG/CAP7253AG.
CAP7250AG/CAP7252AG/CAP7253AG Setup
1)
To configure CAP7250AG/CAP7252AG/CAP7253AG, open a web browser (
example:
Microsoft
Internet Explorer, Mozilla Firefox, Google Chrome, etc.).
2)
In the address bar of the web browser, enter
192.168.1.2
(the default IP address of the
CAP7250AG/CAP7252AG/CAP7253AG)
and hit enter.
3)
A login screen will appear. By default, the
username of the
CAP7250AG/CAP7252AG/CAP7253AG is
admin
and the password is
admin
. Enter the
current username and password of the
CAP7250AG/CAP7252AG/CAP7253AG and
then click
Login
. Refer to the
CAP7250AG/CAP7252AG/CAP7253AG user
manual on how to change the username and
password.
4)
After clicking
Login
with the correct username
and password, the
CAP7250AG/CAP7252AG/CAP7253AG Main Menu will appear. If you are successful, proceed to
setting up the wireless connection.
http://192.168.1.2
